Skip to main content
Elka Suspension
LEADERS IN POWERSPORTS SHOCK ABSORBERS | 1-800-557-0552

FLS-213043_revA

Major VersionM

by Sebastien Blain

  1. Lift the vehicle using a jack or stand so that the wheels are off the ground. Refer to your vehicle's owner manual for specific instructions on how to remove the stock shocks. Keep your original bolts to re-use when installing your new Elka shocks.
    • Lift the vehicle using a jack or stand so that the wheels are off the ground. Refer to your vehicle's owner manual for specific instructions on how to remove the stock shocks. Keep your original bolts to re-use when installing your new Elka shocks.

  2. Install the front new Elka shocks with the reservoir ( on Stage 3-4-5 ) at the top of vehicle and facing outwards of vehicle ( right side shown ). Install the front new Elka shocks ( on stage 1 and 2 ) with the Schraeder nitrogen valve at the top of vehicle. Install the front new Elka shocks with the reservoir ( on Stage 3-4-5 ) at the top of vehicle and facing outwards of vehicle ( right side shown ). Install the front new Elka shocks ( on stage 1 and 2 ) with the Schraeder nitrogen valve at the top of vehicle.
    • Install the front new Elka shocks with the reservoir ( on Stage 3-4-5 ) at the top of vehicle and facing outwards of vehicle ( right side shown ). Install the front new Elka shocks ( on stage 1 and 2 ) with the Schraeder nitrogen valve at the top of vehicle.

  3. On Stage 2, Stage 4 and Stage 5 models, the lower shock eyelets should be installed with the rebound adjuster oriented towards the rear of the vehicle as shown by the blue Arrow on the photo ( right side shown ). If needed, you can turn the lower eyelet to orient properly.
    • On Stage 2, Stage 4 and Stage 5 models, the lower shock eyelets should be installed with the rebound adjuster oriented towards the rear of the vehicle as shown by the blue Arrow on the photo ( right side shown ). If needed, you can turn the lower eyelet to orient properly.

  4. Install both new Elka rear shock with the piggyback reservoir at the top and oriented forward to the front of the vehicule as indicated by the red Arrow on the photo. On Stage 1 and Stage 2, the left and the right shock are the same. Just install them with the shraeder nitrogen valve at the top of vehicle. Install both new Elka rear shock with the piggyback reservoir at the top and oriented forward to the front of the vehicule as indicated by the red Arrow on the photo. On Stage 1 and Stage 2, the left and the right shock are the same. Just install them with the shraeder nitrogen valve at the top of vehicle.
    • Install both new Elka rear shock with the piggyback reservoir at the top and oriented forward to the front of the vehicule as indicated by the red Arrow on the photo. On Stage 1 and Stage 2, the left and the right shock are the same. Just install them with the shraeder nitrogen valve at the top of vehicle.

  5. On Stage 2, Stage 4, and Stage 5 models the rebound adjuster located on lower eyelet of the shocks should be oriented towards the rear of the vehicle, as shown. (Left side shown ). If needed, you can turn the lower eyelet to orient properly.
    • On Stage 2, Stage 4, and Stage 5 models the rebound adjuster located on lower eyelet of the shocks should be oriented towards the rear of the vehicle, as shown. (Left side shown ). If needed, you can turn the lower eyelet to orient properly.

Finish Line

Yan Pitre

Member since: 05/14/2021

1 Reputation

7 Guides authored

Team

R&D Member of R&D

4 Members

79 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 107

Elka Suspension Inc.

1585-M, De Coulomb
Boucherville (Quebec)
Canada J4B 8J7

Toll-Free (US & Canada):
1-800-557-0552

Direct Phone:
+1-450-655-4855