-
-
Remove OEM shocks.
-
Cut hood and central hood as shown to avoid contact with the piggyback head when shocks are fully compressed. Make the cut on both sides. ( Right side shown).
-
-
-
Install piggyback shock with the reservoir upward and facing outside the vehicle.
-
The lower rebound adjuster need to be oriented facing the rear of vehicle. Eyelets can be turned manually.
-
-
-
Install front remote reservoir shocks with the hoses facing the outside of vehicle, and facing rear of vehicle. (Right side shown).
-
Attach the reservoirs on the roll cage as shown.
-
Install the reservoir clamp close to the reservoir head as shown. Clamping reservoir in the middle of the rezzy can cause internal floating piston friction.
-
-
-
The lower rebound adjuster need to be oriented facing the rear of vehicle. Eyelets can be turned manually.
-
-
-
Install rear remote reservoir shocks with the hoses facing the rear of vehicle.
-
Reservoirs can be mounted on the lateral tubes of the cage or the upper horizontal tube as shown.
-
Install the reservoir clamp close to the reservoir head as shown. Clamping reservoir in the middle of the rezzy can cause internal floating piston friction.
-
