-
-
Lift the vehicle using a jack or stand so that the wheels are off the ground. Refer to your vehicle's owner manual for specific instructions on how to remove the stock shocks. Keep your original bolts to re-use when installing your new Elka shocks. You will have to remove the seat, the side panel and the exhaust
-
-
-
Removing the stock shocks Lift the vehicle using a jack or stand so that the wheels are off the ground. Refer to your vehicle's owner manual for specific instructions on how to remove the stock shocks. Keep your original bolts to re-use when installing your new Elka shocks.
-
make sure your rebound ajuster and the introgen valve look up (red circle)
-
Almost done!
Finish Line
