Skip to main content
Elka Suspension
LEADERS IN POWERSPORTS SHOCK ABSORBERS | 1-800-557-0552

FLS-78023_revD

Major VersionM

by Nicolas

  1. Lift the front of the snowmobile in such a way that the skis are off the ground. Remove the stock shocks according to the procedures recommended by the manufacturer.
    • Lift the front of the snowmobile in such a way that the skis are off the ground.

    • Remove the stock shocks according to the procedures recommended by the manufacturer.

    • Install the Elka front shocks with the piggyback reservoir at the top and pointing fowards of the snowmobile as shown

  2. Remove the limiter strap.
    • Remove the limiter strap.

    • Lift the rear of the snowmobile in such a way that the track is not touching the ground.

    • Remove the stock suspension.

    • Install the Elka center shock with piggyback reservoir at the top and pointing towards the right side of the snowmobile as show on the photo.

  3. Install the Elka rear shock with the piggyback reservoir install on the left side with the rebound facing upwards as shown on the photo. Lower the snowmobile completely and re-install the limiter strap.
    • Install the Elka rear shock with the piggyback reservoir install on the left side with the rebound facing upwards as shown on the photo.

    • Lower the snowmobile completely and re-install the limiter strap.

Finish Line

Nicolas

Member since: 11/30/2015

2,311 Reputation

21 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 372

Elka Suspension Inc.

1585-M, De Coulomb
Boucherville (Quebec)
Canada J4B 8J7

Toll-Free (US & Canada):
1-800-557-0552

Direct Phone:
+1-450-655-4855