-
-
Lift the front of the snowmobile in such a way that the skis are off the ground.
-
Remove the stock shocks according to the procedures recommended by the manufacturer.
-
Install the Elka front shocks with the piggyback reservoir at the top and pointing fowards of the snowmobile as shown
-
-
-
Remove the limiter strap.
-
Lift the rear of the snowmobile in such a way that the track is not touching the ground.
-
Remove the stock suspension.
-
Install the stock bushing with both spacer mount on each side of the bottom eyelet.
-
Install the Elka center shock with piggyback reservoir at the top and pointing towards the right side of the snowmobile as show on the photo.
-
-
-
Install the Elka rear shock with the piggyback reservoir install on the right side with the rebound facing upwards as shown on the photo.
-
Lower the snowmobile completely and re-install the limiter strap.
-
